Apparel
chevy_ls_valves.shtml chevy_ls_pistons.shtml chevy_ls_valvetrain.shtml chevy_ls_pushrods.shtml chevy_ls_pistons.bak chevy_ls_rods.shtml
CHEVY LS
Valves Valvetrain Components Pushrods / Timing Kits Rods Pistons Crankshafts / Rotating Assemblies

Manley Performance is proud to introduce our new line of "PRO SERIES" crankshafts specifically designed for the CHEVROLET LS market...The perfect compliment to our existing product range of LS pistons and connecting rods. Why shop anywhere else when you can bullet-proof your LS engine’s bottom-end with quality Manley components?
  • 4340 material forgings and Turbo Tuff Series 4340 Billet material
  • Multi-step heat treatment process and Nitrided for added strength
  • Stress relieved, shot-peened, and magnafluxed
  • Micro polished large radius journals (narrowed bearings required)
  • Available with either 24 or 58 tooth reluctor wheel
  • Gun drilled mains and lightened rod journals for weight reduction
  • Counterweights fully profiled
P/N Design
LW or SLW		 Reluctor Wheel
24 or 58
tooth		 Stroke Min
Rod
Length		 Main
Journal
Diameter		 Rod
Journal
Diameter		 Bob
Weight
(grams)		 Total
Weight
(lbs)
  LIGHTWEIGHT
193924 LW 24 See Note RW 3.622" 6.098" 2.559" 2.100" 1800 51-53
193958 LW 58 3.622" 6.098" 2.559" 2.100" 1800 51-53
190024 LW 24 See Note RW 4.000" 6.125" 2.559" 2.100" 1755 50-52
190024BW LW 24 Billet Wheel 4.000" 6.125" 2.559" 2.100" 1755 50-52
190024NB LW 24 See Note RW 4.000" 6.125" 2.559" 2.100" See Note* 50-52
190058 LW 58 4.000" 6.125" 2.559" 2.100" 1755 50-52
190058NB LW 58 4.000" 6.125" 2.559" 2.100" See Note* 50-52
192124 LW 24 See Note RW 4.000" 6.125" 2.559" 2.100" 1800 51-53
192158 LW 58 4.000" 6.125" 2.559" 2.100" 1800 51-53
190124 LW 24 See Note RW 4.100" 6.125" 2.559" 2.100" 1755 50-52
190124NB LW 24 See Note RW 4.100" 6.125" 2.559" 2.100" See Note* 50-52
190158 LW 58 4.100" 6.125" 2.559" 2.100" 1755 50-52
190158NB LW 58 4.100" 6.125" 2.559" 2.100" See Note* 50-52
194524 LW 24 See Note RW 4.100” 6.125” 2.559” 2.100” 1800 50-52
194558 LW 58 4.100” 6.125” 2.559” 2.100” 1800 50-52
  LIGHTWEIGHT WITH LONG SNOUT (LS-7)
192658 LW 58 4.000" 6.125" 2.559" 2.100" 1800 51-53
192758 LW 58 4.100" 6.125" 2.559" 2.100" 1800 46-48
  4340 BILLET WITH CENTER COUNTERWEIGHTS
190724B** LW 24 See Note RW 3.622" 6.125" 2.559" 2.100" 1780 60
190758B** LW 58 3.622" 6.125" 2.559" 2.100" 1780 60
190824B** LW 24 See Note RW 4.000" 6.125" 2.559" 2.100" 1780 60
190858B** LW 58 4.000" 6.125" 2.559" 2.100" 1780 60
Note: Manley 4340 forged crankshafts are not intended for use with highly boosted roots style cog belt superchargers * These cranks are not balanced and have non-drilled counterweights ** When using this crank in a factory LS block, the block will need to be clearanced for the center counterweight. Note RW: An optional 24 tooth billet steel reluction wheel can be ordered as a seperate item P/N 24BRELUCT


LS “Ready To Run” Rotating Assemblies
  • Lightweight 4340 forged steel crankshaft with 58 tooth reluctor wheel installed
  • 4340 Forged steel H-Beam connecting rods with 7/16" ARP 8740 cap screws or optional ARP 2000 cap screws
  • 2618 Forged aluminum Platinum Series pistons with Premium Chrome Moly wrist pins
  • Total Seal® piston rings & high performance Clevite® “H” Series rod bearings (narrowed) and “P” Series main bearings
Rod Rod Bore Piston Piston Compression Ratio Piston Ring Piston Ring
Part No. Stroke CID Crank P/N Length P/N Size P/N Type 64cc 66cc 70cc 72cc Package P/N
28402 4.000" 402 190058 6.125" 14051 4.005" 596205C Dish -18cc 10.1 9.9 9.5 9.4 1.5mm, 3mm 46110
29402 4.000" 402 190058 6.125" 14051 4.005" 592605C Flat -4cc 11.7 11.4 10.9 10.7 1.5mm, 3mm 46110
28415 4.000" 415 190058 6.125" 14051 4.070" 596270C Dish -18cc 10.4 10.2 9.8 9.6 1.5mm, 3mm 46117
29415 4.000" 415 190058 6.125" 14051 4.070" 592670C Flat -4cc 12.1 11.8 11.3 11.1 1.5mm, 3mm 46117
Factory balanced to +/- 1% of bobweight
Add an "R" to the assembly part number to order the optional ARP 2000 rod bolt upgrade.



With the introduction of our outstanding new line of Pro Series LS crankshafts, we have the ability to offer our customers complete rotating assemblies utilizing Manley Platinum Series pistons and Manley H-Beam or Pro Series I-Beam connecting rods.

Ordering a Manley LS rotating assembly is as easy as 1-2-3…..

      1. Choose your crankshaft part number based on stroke, weight, and reluctor wheel and then order the corresponding rod and main bearing part numbers shown.
      2. Choose your connecting rod part number.
      3. Choose your piston part number based on bore size and desired compression ratio along with the corresponding piston ring part number.
Ordering all of the required components for your LS rotating assembly from Manley will result in extra $ savings. Please contact your Manley representative for more details. Order P/N 04000 if you require Manley to perform balancing.
CRANKS
  • Super Lightweight and Lightweight 4340 material forgings
  • Multi-step heat treatment process and Nitrided for added strength
  • Stress relieved, shot-peened, and 100% magnafluxed
  • Micro polished large radius journals
  • Available with either 24 or 58 tooth reluctor wheels
  • Gun drilled mains and lightened rod journals for weight reduction
  • Counterweights fully profiled

RODS

  • Lightweight design 4340 material forgings
  • Fully machined, heat treated, stress relieved, shot peened, and 100% magnafluxed
  • Big and small end bores are final honed to a tolerance of ± .0002"
  • Bend and twist is tightly controlled
  • Weight matched to +/- 1.5 grams
  • H-Lite comes standard with 3/8" ARP 2000 bolts
  • H-Beam comes standard with low profile 7/16" ARP 8740 bolts providing additional block and oil pan clearance (affix an R for ARP 2000 bolt upgrade)
  • I-Beam comes standard with 7/16" ARP 2000 bolts (affix an R6 suffix for ARP 625+ bolt upgrade)
PISTONS
  • High strength 2618 alloy forgings
  • Exacting ring groove squareness to cylinder wall provides maximum horsepower.
  • Offset wrist pin design
  • Premium Chrome Moly pin included with Standard Series
  • 9310 Alloy pin included with Extreme Duty Series
  • Moly coated skirts

RINGS

  • 1.5 x 1.5 x 3mm Total Seal (moly in-lay tops standard)
  • Premium steel top rings are optional (affix ST suffix)
  • Total Seal Gapless® steel top ring sets also available (affix GT suffix)

BEARINGS

  • Premium Clevite® “H” Series narrowed rod bearings and “P” Series main bearings or "H" Series main bearings

Small Block Chevrolet LS Series
Lightweight 1800gm. Bobweight 3.622" Stroke Cranks
Crank P/N Standard Extreme Duty Compression Ratio Balance Req. (Y/N)
Reluctor Wheel Part No. Part No. Piston Description RingPart No. 64cc 66cc 70cc 72cc 14051-8 14359-8 14559-8
193924
24 Tooth
or
193958
58 Tooth
6.125" Rod P/N
Description
14051-8 H-Beam
or
14359-8 LW I-Beam
or
14559-8 SW I-Beam
Bearing P/N
Description
30010 Rod
&
33030 or 33030H
Main
592107C-8 592107CE-8 3.905/-4cc F/T 46107-8 10.2 10.0 9.5 9.3 Y Y Y
592110C-8 592110CE-8 3.910/-4cc F/T 46107-8 10.3 10.1 9.7 9.5 Y Y Y
592501C-8 592501CE-8 4.001/-4cc F/T 46110-8 10.6 10.4 9.8 9.6 N* Y Y
592510C-8 592510CE-8 4.010/-4cc F/T 46111-8 10.7 10.5 9.9 9.7 N* Y Y
592530C-8 592530CE-8 4.030/-4cc F/T 46113-8 10.8 10.6 10.1 9.9 N* Y Y
592565C-8 592565CE-8 4.065/-4cc F/T 46116-8 11.0 10.7 10.2 10.0 N* Y Y
592570C-8 592570CE-8 4.070/-4cc F/T 46117-8 11.1 10.8 10.3 10.1 N* Y Y
592575C-8 592575CE-8 4.075/-4cc F/T 46117-8 11.2 10.9 10.4 10.2 N* Y Y
592580C-8 592580CE-8 4.080/-4cc F/T 46118-8 11.3 11.0 10.5 10.3 N* Y Y
596107C-8 596107CE-8 3.905/-10cc Dish 46107-8 9.6 9.4 9.0 8.8 Y Y Y
596101C-8 596101CE-8 4.001/-10cc Dish 46110-8 10.0 9.8 9.4 9.2 N* Y Y
596110C-8 596110CE-8 4.010/-10cc Dish 46111-8 10.1 9.9 9.5 9.3 N* Y Y
596130C-8 596130CE-8 4.030/-10cc Dish 46113-8 10.2 9.9 9.5 9.3 N* Y Y
596165C-8 596165CE-8 4.065/-10cc Dish 46116-8 10.3 10.1 9.7 9.5 N* Y Y
596170C-8 596170CE-8 4.070/-10cc Dish 46117-8 10.3 10.1 9.7 9.5 N* Y Y
596175C-8 596175CE-8 4.075/-10cc Dish 46117-8 10.4 10.2 9.8 9.6 N* Y Y
596180C-8 596180CE-8 4.080/-10cc Dish 46118-8 10.5 10.3 9.9 9.6 N* Y Y
596907C-8 596907CE-8 3.905/-18cc Dish 46107-8 8.8 8.7 8.3 8.2 Y Y Y
596901C-8 596901CE-8 4.001/-18cc Dish 46110-8 9.2 9.0 8.7 8.5 Y Y Y
596965C-8 596965CE-8 4.065/-18cc Dish 46116-8 9.5 9.3 9.0 8.8 N* Y Y
596970C-8 596970CE-8 4.070/-18cc Dish 46117-8 9.6 9.4 9.1 8.9 N* Y Y
596975C-8 596975CE-8 4.075/-18cc Dish 46117-8 9.7 9.5 9.2 9.0 N* Y Y
596980C-8 596980CE-8 4.080/-18cc Dish 46118-8 9.8 9.6 9.3 9.1 N* Y Y
*N = Factory balanced to +/- 1% of bobweight
Order part number 04000 for precision balancing to within 5 grams
Note: "LW" "Lightweight" design rod and "SW" = "Standard Weight" design rod

Small Block Chevy LS Series
Super Lightweight 1686gm. Bobweight 4.000" Stroke Cranks
Crank P/N Standard Extreme Duty Compression Ratio
Reluctor Wheel Part No. Part No. Piston Description RingPart No. 64cc 66cc 70cc 72cc Balance Req. (Y/N)
190324 24 Tooth
or 190358
58 Tooth
Rod P/N
Description
14031-8
6.125" H-Lite
Bearing P/N
Description
30010
Rod
&
33030 or 33030H
Main
592207C-8 592207CE-8 3.905/-4cc F/T 46107-8 11.2 11 10.4 10.2 Y
592605C-8 592605CE-8 4.005/-4cc F/T 46110-8 11.7 11.4 10.9 10.7 Y
592610C-8 592610CE-8 4.010/-4cc F/T 46111-8 11.7 11.5 11.0 10.7 Y
592630C-8 592630CE-8 4.030/-4cc F/T 46113-8 11.9 11.6 11.1 10.9 N*
592665C-8 592665CE-8 4.065/-4cc F/T 46116-8 12.1 11.8 11.3 11.1 N*
592670C-8 592670CE-8 4.070/-4cc F/T 46117-8 12.1 11.8 11.3 11.1 N*
592675C-8 592675CE-8 4.075/-4cc F/T 46117-8 12.2 11.9 11.4 11.2 N*
592680C-8 592680CE-8 4.080/-4cc F/T 46118-8 12.3 12.0 11.5 11.3 N*
592701C-8 592701CE-8 4.001/-10cc Dish 46110-8 10.8 10.6 10.1 9.9 Y
592705C-8 592705CE-8 4.005/-10cc Dish 46110-8 10.9 10.7 10.2 10 Y
592730C-8 592730CE-8 4.030/-10cc Dish 46113-8 11.1 10.8 10.3 10.1 N*
592765C-8 592765CE-8 4.065/-10cc Dish 46116-8 11.3 11.0 10.5 10.3 N*
592770C-8 592770CE-8 4.070/-10cc Dish 46117-8 11.4 11.1 10.6 10.4 N*
592775C-8 592775CE-8 4.075/-10cc Dish 46117-8 11.5 11.2 10.7 10.5 N*
592780C-8 592780CE-8 4.080/-10cc Dish 46118-8 11.6 11.3 10.8 10.6 N*
596207C-8 596207CE-8 3.905/-18cc Dish 46107-8 9.7 9.5 9.2 9.0 Y
596205C-8 596205CE-8 4.005/-18cc Dish 46110-8 10.1 9.9 9.5 9.4 N*
596230C-8 596230CE-8 4.030/-18cc Dish 46113-8 10.2 10.0 9.6 9.5 N*
596265C-8 596265CE-8 4.065/-18cc Dish 46116-8 10.4 10.2 9.8 9.6 N*
596270C-8 596270CE-8 4.070/-18cc Dish 46117-8 10.4 10.2 9.8 9.6 N*
596275C-8 596275CE-8 4.075/-18cc Dish 46117-8 10.5 10.3 9.9 9.7 N*
596280C-8 596280CE-8 4.080/-18cc Dish 46118-8 10.6 10.4 10.0 9.8 N*
*N = Factory balanced to +/- 1% of bobweight
Order part number 04000 for precision balancing to within 5 grams

Small Block Chevrolet LS Series
Lightweight 1755gm. Bobweight 4.000" Stroke Cranks
Crank P/N Standard Extreme Duty Compression Ratio Balance Req. (Y/N)
Reluctor Wheel Part No. Part No. Piston Description RingPart No. 64cc 66cc 70cc 72cc 14051-8 14359-8 14559-8
190024
24 Tooth
or
190058
58 Tooth
6.125" Rod P/N
Description
14051-8 H-Beam
or
14359-8 LW I-Beam
or
14559-8 SW I-Beam
Bearing P/N
Description
30010
Rod
&
33030 or 33030H
Main
592207C-8 592207CE-8 3.905/-4cc F/T 46107-8 11.2 11 10.4 10.2 Y Y Y
592605C-8 592605CE-8 4.005/-4cc F/T 46110-8 11.7 11.4 10.9 10.7 N* Y Y
592610C-8 592610CE-8 4.010/-4cc F/T 46111-8 11.7 11.5 11.0 10.7 N* Y Y
592630C-8 592630CE-8 4.030/-4cc F/T 46113-8 11.9 11.6 11.1 10.9 N* Y Y
592665C-8 592665CE-8 4.065/-4cc F/T 46116-8 12.1 11.8 11.3 11.1 N* Y Y
592670C-8 592670CE-8 4.070/-4cc F/T 46117-8 12.1 11.8 11.3 11.1 N* Y Y
592675C-8 592675CE-8 4.075/-4cc F/T 46117-8 12.2 11.9 11.4 11.2 N* Y Y
592680C-8 592680CE-8 4.080/-4cc F/T 46118-8 12.3 12.0 11.5 11.3 N* Y Y
592701C-8 592701CE-8 4.001/-10cc Dish 46110-8 10.8 10.6 10.1 9.9 N* Y Y
592705C-8 592705CE-8 4.005/-10cc Dish 46110-8 10.9 10.7 10.2 10 N* Y Y
592730C-8 592730CE-8 4.030/-10cc Dish 46113-8 11.1 10.8 10.3 10.1 N* Y Y
592765C-8 592765CE-8 4.065/-10cc Dish 46116-8 11.3 11 10.5 10.3 N* Y Y
592770C-8 592770CE-8 4.070/-10cc Dish 46117-8 11.4 11.1 10.6 10.4 N* Y Y
592775C-8 592775CE-8 4.075/-10cc Dish 46117-8 11.5 11.2 10.7 10.5 N* Y Y
592780C-8 592780CE-8 4.080/-10cc Dish 46118-8 11.6 11.3 10.8 10.6 N* Y Y
596207C-8 596207CE-8 3.905/-18cc Dish 46107-8 9.7 9.5 9.2 9.0 Y Y Y
596205C-8 596205CE-8 4.005/-18cc Dish 46110-8 10.1 9.9 9.5 9.4 N* Y Y
596230C-8 596230CE-8 4.030/-18cc Dish 46113-8 10.2 10.0 9.6 9.5 N* Y Y
596265C-8 596265CE-8 4.065/-18cc Dish 46116-8 10.4 10.2 9.8 9.6 N* Y Y
596270C-8 596270CE-8 4.070/-18cc Dish 46117-8 10.4 10.2 9.8 9.6 N* Y Y
596275C-8 596275CE-8 4.075/-18cc Dish 46117-8 10.5 10.3 9.9 9.7 N* Y Y
596280C-8 596280CE-8 4.080/-18cc Dish 46118-8 10.6 10.4 10.0 9.8 N* Y Y
592807C-8 592807CE-8 3.905/-29cc Dish 46107-8 8.7 8.5 8.2 8.1 Y Y Y
592805C-8 592805CE-8 4.005/-29cc Dish 46110-8 9.1 8.9 8.6 8.5 N* Y Y
592830C-8 592830CE-8 4.030/-29cc Dish 46113-8 9.2 9 8.7 8.6 N* Y Y
592865C-8 592865CE-8 4.065/-29cc Dish 46116-8 9.3 9.1 8.8 8.7 N* Y Y
592870C-8 592870CE-8 4.070/-29cc Dish 46117-8 9.4 9.2 8.9 8.8 N* Y Y
592875C-8 592875CE-8 4.075/-29cc Dish 46117-8 9.5 9.3 9.0 8.9 N* Y Y
592880C-8 592880CE-8 4.080/-29cc Dish 46118-8 9.6 9.4 9.1 9.0 N* Y Y
*N = Factory balanced to +/- 1% of bobweight
Order part number 04000 for precision balancing to within 5 grams
Note: "LW" "Lightweight" design rod and "SW" = "Standard Weight" design rod

Small Block Chevrolet LS Series
Lightweight 1800gm. Bobweight 4.000" Stroke Cranks
Crank P/N Standard Extreme Duty Compression Ratio Balance Req. (Y/N)
Reluctor Wheel Part No. Part No. Piston Description RingPart No. 64cc 66cc 70cc 72cc 14051-8 14359-8 14559-8
192124 24 Tooth
or
192158 58 Tooth
6.125" Rod P/N
Description
14051-8 H-Beam
or
14359-8 LW I-Beam
or
14559-8 SW I-Beam
Bearing P/N
Description
30010 Rod
33030 or 33030H Main
592300C-8 592300CE-8 4.125/-5cc F/T 46360-8 12.3 12.0 11.5 11.3 N* Y Y
592305C-8 592305CE-8 4.130/-5cc F/T 46361-8 12.4 12.1 11.6 11.4 N* Y Y
592400C-8 592400CE-8 4.125/-11cc Dish 46360-8 11.5 11.3 10.8 10.6 N* Y Y
592405C-8 592405CE-8 4.130/-11cc Dish 46361-8 11.6 11.4 10.9 10.5 N* Y Y
596300C-8 596300CE-8 4.125/-18cc Dish 46360-8 10.6 10.4 10.0 9.8 N* Y Y
596305C-8 596305CE-8 4.130/-18cc Dish 46361-8 10.6 10.4 10.0 9.9 N* Y Y
592900C-8 592900CE-8 4.125/-29cc Dish 46360-8 9.6 9.4 9.1 9.0 N* Y Y
592905C-8 592905CE-8 4.130/-29cc Dish 46361-8 9.7 9.5 9.2 9.1 N* Y Y





*N = Factory balanced to +/- 1% of bobweight
Order part number 04000 for precision balancing to within 5 grams
Note: "LW" "Lightweight" design rod and "SW" = "Standard Weight" design rod

Small Block Chevrolet LS Series
Lightweight 1755gm. Bobweight 4.100" Stroke Cranks
Crank P/N Standard Extreme Duty Compression Ratio Balance Req. (Y/N)
Reluctor Wheel Part No. Part No. Piston Description RingPart No. 64cc 66cc 70cc 72cc 14051-8 14359-8 14559-8
190124
24 Tooth
or
190158
58 Tooth
6.125" Rod P/N Description
14051-8 H-Beam
or
14359-8 LW I-Beam
or
14559-8 SW I-Beam
Bearing P/N
Description
30010
Rod
&
33030 or 33030H
Main
596505C-8 596505CE-8 4.005/-10cc Dish 46110-8 11.1 10.9 10.5 10.3 N* Y Y
596565C-8 596565CE-8 4.065/-10cc Dish 46116-8 11.4 11.2 10.7 10.5 N* Y Y
596570C-8 596570CE-8 4.070/-10cc Dish 46117-8 11.5 11.3 10.8 10.6 N* Y Y
596575C-8 596575CE-8 4.075/-10cc Dish 46117-8 11.6 11.4 10.9 10.7 N* Y Y
596580C-8 596580CE-8 4.080/-10cc Dish 46118-8 11.7 11.5 11.0 10.8 N* Y Y
596600C-8 596600CE-8 4.125/-11cc Dish 46360-8 11.6 11.4 10.9 10.7 Y N* Y
596605C-8 596605CE-8 4.130/-11cc Dish 46361-8 11.7 11.5 11 10.8 Y N* Y
596005C-8 596005CE-8 4.005/-20cc Dish 46110-8 10.1 9.9 9.6 9.4 N* Y Y
596065C-8 596065CE-8 4.065/-20cc Dish 46116-8 10.4 10.2 9.8 9.6 N* N* Y
596070C-8 596070CE-8 4.070/-20cc Dish 46117-8 10.4 10.2 9.8 9.7 N* N* Y
596075C-8 596075CE-8 4.075/-20cc Dish 46117-8 10.5 10.3 9.9 9.8 N* N* Y
596080C-8 596080CE-8 4.080/-20cc Dish 46118-8 10.6 10.4 10.0 9.9 N* N* Y
596400C-8 596400CE-8 4.125/-20cc Dish 46360-8 10.6 10.4 10.1 9.9 Y N* Y
596405C-8 596405CE-8 4.130/-20cc Dish 46361-8 10.7 10.5 10.1 9.9 Y N* Y
596705C-8 596705CE-8 4.005/-31cc Dish 46110-8 9.1 9 8.7 8.5 N* Y Y
596765C-8 596765CE-8 4.065/-31cc Dish 46116-8 9.3 9.2 8.9 8.7 N* Y Y
596770C-8 596770CE-8 4.070/-31cc Dish 46117-8 9.4 9.3 9 8.8 N* N* Y
596775C-8 596775CE-8 4.075/-31cc Dish 46117-8 9.5 9.4 9.1 8.9 N* N* Y
596780C-8 596780CE-8 4.080/-31cc Dish 46118-8 9.6 9.5 9.2 9.0 N* N* Y
596800C-8 596800CE-8 4.125/-31cc Dish 46360-8 9.6 9.4 9.1 9 Y N* Y
596805C-8 596805CE-8 4.130/-31cc Dish 46361-8 9.7 9.5 9.2 9.1 Y N* Y
 
 
 
*N = Factory balanced to +/- 1% of bobweight
Order part number 04000 for precision balancing to within 5 grams
Note: "LW" "Lightweight" design rod and "SW" = "Standard Weight" design rod

Small Block Chevrolet LS-7 (Long Snout)
Lightweight 1800gm. Bobweight 4.000" Stroke Cranks
Crank P/N Standard Extreme Duty Compression Ratio Balance Req. (Y/N)
Reluctor Wheel Part No. Part No. Piston Description RingPart No. 64cc 66cc 70cc 72cc 14051-8 14359-8 14559-8
192658 58 Tooth
6.125" Rod P/N
Description
14051-8 H-Beam
or
14359-8 LW I-Beam
or
14559-8 SW I-Beam
Bearing P/N
Description
30010 Rod
33030 or 33030H Main
592300C-8 592300CE-8 4.125/-5cc F/T 46360-8 12.3 12.0 11.5 11.3 N* Y Y
592305C-8 592305CE-8 4.130/-5cc F/T 46361-8 12.4 12.1 11.6 11.4 N* Y Y
592400C-8 592400CE-8 4.125/-11cc Dish 46360-8 11.5 11.3 10.8 10.6 N* Y Y
592405C-8 592405CE-8 4.130/-11cc Dish 46361-8 11.6 11.4 10.9 10.5 N* Y Y
596300C-8 596300CE-8 4.125/-18cc Dish 46360-8 10.6 10.4 10.0 9.8 N* Y Y
596305C-8 596305CE-8 4.130/-18cc Dish 46361-8 10.6 10.4 10.0 9.9 N* Y Y
592900C-8 592900CE-8 4.125/-29cc Dish 46360-8 9.6 9.4 9.1 9.0 N* Y Y
592905C-8 592905CE-8 4.130/-29cc Dish 46361-8 9.7 9.5 9.2 9.1 N* Y Y




*N = Factory balanced to +/- 1% of bobweight
Order part number 04000 for precision balancing to within 5 grams
Note: "LW" "Lightweight" design rod and "SW" = "Standard Weight" design rod

Small Block Chevrolet LS-7 (Long Snout)
Lightweight 1800gm. Bobweight 4.100" Stroke Cranks
Crank P/N Standard Extreme Duty Compression Ratio Balance Req. (Y/N)
Reluctor Wheel Part No. Part No. Piston Description RingPart No. 64cc 66cc 70cc 72cc 14051-8 14359-8 14559-8
192758 58 Tooth
6.125" Rod P/N
Description
14051-8 H-Beam
or
14359-8 LW I-Beam
or
14559-8 SW I-Beam
Bearing P/N
Description
30010 Rod
33030 or 33030H Main
596600C-8 596600CE-8 4.125/-11cc Dish 46360-8 11.6 11.4 10.9 10.7 N* Y Y
596605C-8 596605CE-8 4.130/-11cc Dish 46361-8 11.7 11.5 11.0 10.8 N* Y Y
596400C-8 596400CE-8 4.125/-20cc Dish 46360-8 10.6 10.4 10.1 9.9 N* Y Y
596405C-8 596405CE-8 4.130/-20cc Dish 46361-8 10.7 10.5 10.1 9.9 N* Y Y
596800C-8 596800CE-8 4.125/-31cc Dish 46360-8 9.6 9.4 9.1 9.0 N* Y Y
596805C-8 596805CE-8 4.130/-31cc Dish 46361-8 9.7 9.5 9.2 9.1 N* Y Y





*N = Factory balanced to +/- 1% of bobweight
Order part number 04000 for precision balancing to within 5 grams
Note: "LW" "Lightweight" design rod and "SW" = "Standard Weight" design rod
© 2020 Manley Performance Products, Inc.
sales@manleyperformance.com  |  Terms and Conditions  |  Prop 65